로그인회원가입마이페이지고객센터
 
계측기 전문 화신텍시스템 입니다.
 
HOME > EMC / EMI

정전기 시뮬레이터 ESS-S3011A
제조사 :NOISEKEN

EN/IEC 61000-4-2 Ed2 Compliant 
  • ISO 10605 Ed2 Compliant    (Note: Optional gun head and CR units are required.) 
  • Pre-test 
  •         "3 pre-checking functions” taking the confirmable test into the account

            "CR constant indicator” to ensure correct attachment is in place

    • During test

            “Ten-key & Rotary knob” to ease the setting

            “Infra-red Remote Controller” to allow remote Generator setting

            “Discharge Detecting Function” to realize the air-discharge confirmation

            “Lightest Discharge Gun in the market” for better continuous operation

            “White LED light” to show Discharging points  

    •  After test

            “Control Software” for Test Result Reporting and PC Control

             (Scheduled to be downloaded from NoiseKen web-site)

      

    SPECIFICATIONS

     ESD Simulator Main Unit Model : ESS-S3011 
    ItemsESS-S3011 specifications
    PolarityPositive or negative
    Output voltage

    0.2 to 30.0kV +/-5% (30.5kV Maximum)

    0.2 to 10kV: 0.05V step,  10.0 to 30.0kV: 0.1kV step

    Repetition cycle

    0.05s to 99.9s +/-10% / Manual

    0.05s to 10.0s: 0.05s step,  10.0 to 99.9s: 0.10s step

    No. of time of discharge1 to 60,000 times /continuous
     Discharge modeContac discharge / Air discharge
    Radiation level modeNormal mode / Extra mode
    Trigger modeGun trigger / Main unit trigger / External trigger
    Operation panelColor LCD / Push-buttons (Partially lighting)
    Gun holderStandard attached (to hold the discharge gun Model GT-30R)
    Radiation mode select switchExtra / Normal switching function built-in
    Discharge detectionDischarge detection function in air-discharge mode equipped
    Pre-checking functionFollowing 3 steps function equipped (by under operation. Not the calibration but just checking)
    SETP1 High voltage output checking
    STEP2 Withstanding voltage checking
    STEP3 Discharge relay operation checking
    CR & Gun head checking CR constant and gun head recognizable (with an indicator to prevent the wrong combination)
    IEC standard test mode

    Contact discharge mode: 2.0, 4.0, 6.0, 8.0 kV step

    Air discharge mode: 2.0, 4.0, 8.0, 15.0 kV step

    Manual test mode

    Contact/Air discharge mode: 0.20kV to 30.0kV

    Sweep function available

    Up to 50 units (test settings) storable

    Sequence test mode

    Seamless run of the selected test sequence

    No. of steps per one sequence: up to 22 steps

    No. of test sequences: up to 20

    Warning lamp

    Lights up while the HV circuitry is on.

    Blinks while discharges are in progress.

    Charging capacitor and resistance150pF +/-10%, 330 ohm+/-10%  (built into Discharge Gun GT-30R)
    Main unit charging resistance10M ohm (53M ohm for combination with Discharge Gun GT-30R)
    AUX connector

    D-SUB 15 pin, female connector

    Connection of Warning Lamp (optional)

    Connection of Automatic ESD Eliminator (optional)

    External interlock input

    External trigger input

    Optical communication connectorOptic connector for PC communication (serial interface)
    Power supply/ Power consumption100V to 240V AC, 50Hz/60Hz +/-10%  75VA
    Included accessories

    Remote controller 13-00004A, Gun holder, Instruction manual

    Dimensions and weight

     (W) 270 X  (H)312 X  (D)295 mm

    Approx. 7.0kg (gun holder excluded)  , Approx. 7.5kg (gun holder included)  

     Discharge Gun Model :  GT-30R 

    ItemsGT-30R specifications
    Output voltage30.5kV Max
    PolarityPositive or Negative
    Repetition cycle0.05s and over   Note) Guaranteed value is 0.1s and over  (330pF and under)
    Discharge modeContact or Air
    Charging resistorBuilt-in CR unit
    Charge/Discharge capacitor & Discharge resistorBuilt-in CR unit
    High voltage connectorComposite connector of high voltage and signal line (male)  。ハNoiseKen custom)
    Operation switchDischarge trigger
    LED irradiatorWhite LED light built-in for irradiating EUT 。ハFocusing point is the tip)
    Included accessories

    CR unit (150pf-330 ohm) 06-00073A

    Conical discharge tip 12-00007A

    Round discharge tip 12-00008A

    Instruction manual  

    Dimensions and weight

      (W) 83X  (H) 217 X  (D) 229 mm  (projection excluded)
    Approx. 0.8kg (Cable and connector excluded)

    Approx. 10.8kg (Cable included, connecter excluded)